<?php

/**
 * SuiteDesk site-specific configuration file.
 *
 * IMPORTANT NOTE:
 * This file may have been set to read-only by Drupal. If you make changes to
 * this file, be sure to protect it again after making your modifications.
 * Failure to remove write permission to this file is a security risk.
 *
 * The configuration file to be loaded is based upon the rules below.
 *
 * The configuration directory will be discovered by stripping the website's
 * hostname from left to right and pathname from right to left. The first
 * configuration file found will be used and any others will be ignored. If no
 * other configuration file is found then the default configuration file at
 * 'config/default' will be used. For example, for a fictitious site installed
 * at http://www.example.org/mysite/test the 'settings.php' is searched in the
 * following directories:
 *
 *  1. config/www.example.org.mysite.test
 *  2. config/example.org.mysite.test
 *  3. config/org.mysite.test
 *
 *  4. config/www.example.org.mysite
 *  5. config/example.org.mysite
 *  6. config/org.mysite
 *
 *  7. config/www.example.org
 *  8. config/example.org
 *  9. config/org
 *
 * 10. config/default
 *
 * If you are installing on a non-standard port number, prefix the hostname with
 * that number. For example, http://www.example.org:8080/mysite/test could be
 * loaded from config/8080.www.drupal.org.mysite.test directory.
 */

/**
 * Database settings.
 *
 * Note that the $db_url variable gets parsed using PHP's built-in URL parser
 * (i.e. using the "parse_url()" function) so make sure not to confuse the
 * parser. If your username, password or database name contain characters used
 * to delineate $db_url parts, you can escape them via URI hex encodings:
 *
 *   : = %3a   / = %2f   @ = %40
 *   + = %2b   ( = %28   ) = %29
 *   ? = %3f   = = %3d   & = %26
 *
 * To specify multiple connections to use in your site (i.e. for complex custom
 * modules) you can also specify an associative array of $db_url variables with
 * the 'default' element used until otherwise requested.
 *
 * If you prefix some or all database table names, you can use the $db_prefix
 * setting and each table name will be prepended with its value. Be sure to use
 * valid database characters only, usually alphanumeric and underscore. If no
 * prefixes are desired, leave it as an empty string ''.
 *
 * To have all database names prefixed, set $db_prefix as a string:
 *
 *   $db_prefix = 'main_';
 *
 * To provide prefixes for specific tables set $db_prefix as an array where keys
 * are the table names and the values are the prefixes. The 'default' element
 * holds the prefix for any tables not specified elsewhere in the array:
 *
 *   $db_prefix = array(
 *     'default'   => 'main_',
 *     'users'     => 'shared_',
 *     'sessions'  => 'shared_',
 *     'role'      => 'shared_',
 *     'authmap'   => 'shared_',
 *   );
 *
 * Database URL format:
 *   $db_url = 'mysql://username:password@localhost/databasename';
 *   $db_url = 'mysqli://username:password@localhost/databasename';
 *   $db_url = 'pgsql://username:password@localhost/databasename';
 */
$db_url = 'mysql://username:password@localhost/databasename';
$db_prefix = '';

/**
 * SuiteCRM (a fork of SugarCRM) access.
 *
 * Don't forget to assign TRUE to this variable and uncomment to provide the
 * SuiteCRM database connection.
 */
$conf['storm_suitecrm'] = FALSE;
# $db_url['sugarcrm'] = 'mysql://username:password@localhost/databasename';

/**
 * Database default collation.
 *
 * All data stored in Drupal is in UTF-8. Certain databases, such as MySQL,
 * support different algorithms for comparing, indexing, and sorting characters;
 * a so called "collation". The default collation of a database normally works
 * for many use-cases, but depending on the language(s) of the stored data, it
 * may be necessary to use a different collation.
 * Important:
 * - Only set or change this value BEFORE installing SuiteDesk, unless you know
 *   what you are doing.
 * - All database tables and columns should be in the same collation. Otherwise,
 *   string comparisons performed for table JOINs will be significantly slower.
 * - Especially when storing data in German or Russian on MySQL 5.1+, you want
 *   to use the 'utf8_unicode_ci' collation instead.
 * - More information at http://drupal.org/node/772678
 */
# $db_collation = 'utf8_general_ci';

/**
 * Access control for update.php script.
 *
 * If you are updating your SuiteDesk installation using the update.php script
 * being not logged in as administrator, you will need to modify the access
 * check statement below. Change the FALSE to a TRUE value to disable the access
 * check. After finishing the upgrade, be sure to open this file again and
 * change the TRUE back to a FALSE!
 */
$update_free_access = FALSE;

/**
 * Base URL (optional).
 *
 * If you are experiencing issues with different site domains, uncomment the
 * Base URL statement below and fill in the absolute URL to your SuiteDesk
 * installation.
 *
 * You might also want to force users to use a given domain. See the .htaccess
 * file for more information.
 *
 * Examples:
 *   $base_url = 'http://www.example.com';
 *   $base_url = 'http://www.example.com:8888';
 *   $base_url = 'http://www.example.com/drupal';
 *   $base_url = 'https://www.example.com:8888/drupal';
 *
 * It is not allowed to have a trailing slash; Drupal will add it for you.
 */
# $base_url = 'http://www.example.com';  // NO trailing slash!

/**
 * PHP settings.
 *
 * To see what PHP settings are possible, including whether they can be set at
 * runtime (i.e., when ini_set() occurs), read the PHP documentation at
 * http://www.php.net/manual/en/ini.php#ini.list and take a look at the
 * .htaccess file to see which non-runtime settings are used there. Settings
 * defined here should not be duplicated there so as to avoid conflict issues.
 */
ini_set('arg_separator.output',     '&amp;');
ini_set('magic_quotes_runtime',     0);
ini_set('magic_quotes_sybase',      0);
ini_set('session.cache_expire',     259200);    // 72 horas
ini_set('session.cache_limiter',    'none');    // ¿nocache?
ini_set('session.cookie_lifetime',  2592000);   // 30 días
ini_set('session.gc_maxlifetime',   259200);    // 72 horas
ini_set('session.save_handler',     'user');
ini_set('session.use_cookies',      1);
ini_set('session.use_only_cookies', 1);
ini_set('session.use_trans_sid',    0);
ini_set('url_rewriter.tags',        '');
# ini_set('memory_limit',           '140M');

/**
 * If you encounter a situation where users post a large amount of text, and the
 * result is stripped out upon viewing but can still be edited, Drupal's output
 * filter may not have sufficient memory to process it. If you experience this
 * issue, you may wish to uncomment the following two lines and increase their
 * limit values. See http://php.net/manual/en/pcre.configuration.php.
 */
# ini_set('pcre.backtrack_limit', 200000);
# ini_set('pcre.recursion_limit', 200000);

/**
 * Drupal automatically generates a unique session cookie name for each site
 * based on its full domain name. If you have multiple domains pointing at the
 * same site, you can either redirect them all to a single domain (see comment
 * in .htaccess), or uncomment the line below and specify their shared base
 * domain. Doing so assures that users remain logged in as they cross between
 * your various domains.
 */
# $cookie_domain = 'example.com';

/**
 * Variable overrides.
 *
 * To override specific entries in the 'variable' table for this site, set
 * them here. You usually don't need to use this feature. This is useful in a
 * configuration file for a vhost or directory, rather than the default
 * settings.php. Any configuration setting from the 'variable' table can be
 * given a new value. Note that any values you provide in these variable
 * overrides will not be modifiable from the Drupal administration interface.
 *
 * Remove the leading hash signs to enable.
 */
# $conf = array(
#   'site_name' => 'My SuiteDesk site',
#   'anonymous' => 'Visitor',
/**
 * A custom theme can be set for the off-line page. This applies when the site
 * is explicitly set to off-line mode through the administration page or when
 * the database is inactive due to an error. It can be set through the
 * 'maintenance_theme' key. The template file should also be copied into the
 * theme. It is located inside 'modules/system/maintenance-page.tpl.php'.
 * Note: This setting does not apply to installation and update pages.
 */
#   'maintenance_theme' => 'garland',
/**
 * reverse_proxy accepts a boolean value.
 *
 * Enable this setting to determine the correct IP address of the remote client
 * by examining information stored in the X-Forwarded-For headers.
 * X-Forwarded-For headers are a standard mechanism for identifying client
 * systems connecting through a reverse proxy server, such as Squid or Pount.
 * Reverse proxy servers are often used to enhance the performance of heavily
 * visited sites and may also provide other site caching, security or encryption
 * benefits. If this Drupal installation operates behind a reverse proxy, this
 * setting should be enabled so that correct IP address information is captured
 * in Drupal's session management, logging, statistics and access management
 * systems; if you are unsure about this setting, do not have a reverse proxy,
 * or Drupal operates in a shared hosting environment, this setting should be
 * to disabled.
 */
#   'reverse_proxy' => TRUE,
/**
 * reverse_proxy accepts an array of IP addresses.
 *
 * Each element of this array is the IP address of any of your reverse proxies.
 * Filling this array Drupal will trust the information stored in the
 * X-Forwarded-For headers only if Remote IP address is one of these, that is
 * the request reaches the web server from one of your reverse proxies.
 * Otherwise, the client could directly connect to your web server spoofing the
 * X-Forwarded-For headers.
 */
#   'reverse_proxy_addresses' => array('a.b.c.d', ...),
# );

/**
 * String overrides.
 *
 * To override specific strings on your site with or without enabling locale
 * module, add an entry to this list. This functionality allows you to change a
 * small number of your site's default English language interface strings.
 *
 * Remove the leading hash signs to enable.
 */
# $conf['locale_custom_strings_en'] = array(
#   'forum'      => 'Discussion board',
#   '@count min' => '@count minutes',
# );

/**
 * Multilingual settings.
 *
 * This is a collection of variables that can be set up for each language when
 * i18n is enabled. These are the basic ones for Drupal core, but you can add
 * your own here.
 */
$conf['i18n_variables'] = array(
  // User email variables:
  'user_registration_help',
  'user_mail_register_admin_created_subject',
  'user_mail_register_admin_created_body',
  'user_mail_register_no_approval_required_subject',
  'user_mail_register_no_approval_required_body',
  'user_mail_register_pending_approval_subject',
  'user_mail_register_pending_approval_body',
  'user_mail_password_reset_subject',
  'user_mail_password_reset_body',
  'user_mail_status_activated_subject',
  'user_mail_status_activated_body',
  'user_mail_status_blocked_subject',
  'user_mail_status_blocked_body',
  'user_mail_status_deleted_subject',
  'user_mail_status_deleted_body',
  'user_picture_guidelines',
  // Primary and secondary links:
  'menu_primary_links_source',
  // Custom error module variables:
  'customerror_403_title',
  // Print link:
  'print_html_link_text',
  // Watcher templates:
  'watcher_notifications_templates_header',
  'watcher_notifications_templates_footer',
  'watcher_notifications_templates_footer_anonymous_notify',
  'watcher_notifications_templates_footer_confirm',
  'watcher_notifications_templates_body_node',
  'watcher_notifications_templates_body_cmt',
  'watcher_notifications_templates_body_confirm',
);

/**
 * Secure Pages deactivation.
 *
 * Uncomment to deactivate the secure pages SSL module.
 */
# $conf['securepages_enable'] = 0;

/**
 * Advanced CSS/JS Aggregation deactivation.
 *
 * Uncomment to deactivate the advanced CSS and JS aggregation module.
 */
# $conf['advagg_enabled'] = 0;